A
-
Activation energy
Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
-
Al10Co25Cr8Fe15Ni36Ti6
The effect of ageing on the microstructure and hardness of Al10Co25Cr8Fe15Ni36Ti6 high entropy alloys [Volume 34, Issue 3, 2023, Pages 1-14]
-
Alumino-thermic system of Al-Fe2O3-Cr2O3-NiO
Thermal and phase analysis of aluminothermic self-propagation process in Al-Fe2O3-Cr2O3-NiO system [Volume 34, Issue 1, 2023, Pages 15-30]
-
Anodized
Surface improvement of AZ31 magnesium alloy for engineering applications [Volume 34, Issue 4, 2023, Pages 45-58]
-
API-5CT-L80 alloy steel
Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
-
APS
Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
B
-
Back-Relaxation effect
3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
-
Bandgap energy
Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
-
Bone
Surface improvement of AZ31 magnesium alloy for engineering applications [Volume 34, Issue 4, 2023, Pages 45-58]
C
-
Carbon fibers
Investigation on Microstructure and Mechanical Behavior of Carbon and Glass Reinforced Aluminum CompositePipes [Volume 34, Issue 1, 2023, Pages 31-46]
-
Carbon nanotubes
Investigating the Microstructure and Mechanical Properties of Cu-5Zn Alloy Nanocomposite Reinforced with Carbon Nanotubes [Volume 34, Issue 3, 2023, Pages 17-28]
-
Carbon nanotubes
Investigating the wear behavior of nanocomposite based on Cu-5Zn alloy reinforced with carbon nanotubes [Volume 34, Issue 4, 2023, Pages 1-16]
-
Casting
Investigation of microstructure and mechanical properties of aluminum alloy parts manufactured by Balouch Aluminum Co [Volume 34, Issue 2, 2023, Pages 51-66]
-
Casting nanocomposite
Investigation of the microstructure and mechanical properties of cast Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with SiC nanoparticles after age hardening heat treatment [Volume 34, Issue 1, 2023, Pages 1-14]
-
Chitosan
Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
-
CNT
The Effect of LDPE Presence in Grain Boundaries on HDPE/CNT Nanocomposite with Segregate Structure on Electrical Conductivity and Mechanical Properties [Volume 34, Issue 3, 2023, Pages 95-108]
-
Coating
Surface improvement of AZ31 magnesium alloy for engineering applications [Volume 34, Issue 4, 2023, Pages 45-58]
-
Co- doped zinc oxide
Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
-
Colored wastewater
Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
-
Comsol
3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
-
Conductive Polymer Composites
Effect of Presence LDPE on Mechanical and Electrical Properties of CB/HDPE Segregated Structure [Volume 34, Issue 4, 2023, Pages 59-70]
-
Cross-linking agent
Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
-
Cu-Mn-O system
The Effect of Process Parameters on the Phase and Microstructure of Cu-Mn-O Mixed Metal Oxide Synthesized via Solution Combustion Synthesis [Volume 34, Issue 4, 2023, Pages 31-44]
-
CuO nanoparticles
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
D
-
Dynamic Recrystallization
Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
E
-
E. coli
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
-
Effect ratios of fuel to oxidizer
The Effect of Process Parameters on the Phase and Microstructure of Cu-Mn-O Mixed Metal Oxide Synthesized via Solution Combustion Synthesis [Volume 34, Issue 4, 2023, Pages 31-44]
-
Electrical conductivity
Effect of Presence LDPE on Mechanical and Electrical Properties of CB/HDPE Segregated Structure [Volume 34, Issue 4, 2023, Pages 59-70]
-
Electrical resistance
Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
-
Electroless Nickel
Synthesis and characterization of electroless Ni-P-ZrO2-TiO2 coating on Steel substrate [Volume 34, Issue 2, 2023, Pages 67-86]
F
-
Flow stress
Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
-
Friction and wear
Investigating the wear behavior of nanocomposite based on Cu-5Zn alloy reinforced with carbon nanotubes [Volume 34, Issue 4, 2023, Pages 1-16]
G
-
GDOES
Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
-
GI-XRD
Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
-
Glass fibers
Investigation on Microstructure and Mechanical Behavior of Carbon and Glass Reinforced Aluminum CompositePipes [Volume 34, Issue 1, 2023, Pages 31-46]
-
GTD-111 nickel superalloy
Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
H
-
Hardness
Synthesis and characterization of electroless Ni-P-ZrO2-TiO2 coating on Steel substrate [Volume 34, Issue 2, 2023, Pages 67-86]
-
Hardness
The effect of ageing on the microstructure and hardness of Al10Co25Cr8Fe15Ni36Ti6 high entropy alloys [Volume 34, Issue 3, 2023, Pages 1-14]
-
HDPE
The Effect of LDPE Presence in Grain Boundaries on HDPE/CNT Nanocomposite with Segregate Structure on Electrical Conductivity and Mechanical Properties [Volume 34, Issue 3, 2023, Pages 95-108]
-
High entropy alloys
The effect of ageing on the microstructure and hardness of Al10Co25Cr8Fe15Ni36Ti6 high entropy alloys [Volume 34, Issue 3, 2023, Pages 1-14]
-
High temperature oxidation
Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
-
Hot compression
Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
-
Hot Deformation
Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
-
HVOF
Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
I
-
Intermetallic compounds
The effect of silicon on the formation of titanium aluminide intermetallic compounds from Al and TiO2 [Volume 34, Issue 1, 2023, Pages 47-58]
-
Ionic Polymer Metal Composite (IPMC)
3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
L
-
LDPE
The Effect of LDPE Presence in Grain Boundaries on HDPE/CNT Nanocomposite with Segregate Structure on Electrical Conductivity and Mechanical Properties [Volume 34, Issue 3, 2023, Pages 95-108]
M
-
Mechanical properties
Investigating the microstructure and strength properties of 500 series aluminum casting alloy modified with rare earth element erbium [Volume 34, Issue 2, 2023, Pages 87-96]
-
Mechanical properties
Investigating the Microstructure and Mechanical Properties of Cu-5Zn Alloy Nanocomposite Reinforced with Carbon Nanotubes [Volume 34, Issue 3, 2023, Pages 17-28]
-
Mechanical properties
Effect of Presence LDPE on Mechanical and Electrical Properties of CB/HDPE Segregated Structure [Volume 34, Issue 4, 2023, Pages 59-70]
-
Mechanism
The effect of silicon on the formation of titanium aluminide intermetallic compounds from Al and TiO2 [Volume 34, Issue 1, 2023, Pages 47-58]
-
Mg alloy. Temporary
Surface improvement of AZ31 magnesium alloy for engineering applications [Volume 34, Issue 4, 2023, Pages 45-58]
-
Microstructure
Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
-
Microstructure
Investigation of microstructure and mechanical properties of aluminum alloy parts manufactured by Balouch Aluminum Co [Volume 34, Issue 2, 2023, Pages 51-66]
-
Microstructure
Investigating the microstructure and strength properties of 500 series aluminum casting alloy modified with rare earth element erbium [Volume 34, Issue 2, 2023, Pages 87-96]
-
Microstructure
The effect of ageing on the microstructure and hardness of Al10Co25Cr8Fe15Ni36Ti6 high entropy alloys [Volume 34, Issue 3, 2023, Pages 1-14]
-
Microstructure
Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
-
Mixed metal oxide
The Effect of Process Parameters on the Phase and Microstructure of Cu-Mn-O Mixed Metal Oxide Synthesized via Solution Combustion Synthesis [Volume 34, Issue 4, 2023, Pages 31-44]
-
Multiphysics Modeling
3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
N
-
Nanocomposite
Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
-
Nanocomposite
The Effect of LDPE Presence in Grain Boundaries on HDPE/CNT Nanocomposite with Segregate Structure on Electrical Conductivity and Mechanical Properties [Volume 34, Issue 3, 2023, Pages 95-108]
-
Nanocomposite adsorbent
Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
-
Nanocomposites
Investigating the Microstructure and Mechanical Properties of Cu-5Zn Alloy Nanocomposite Reinforced with Carbon Nanotubes [Volume 34, Issue 3, 2023, Pages 17-28]
-
Nanocomposites
Investigating the wear behavior of nanocomposite based on Cu-5Zn alloy reinforced with carbon nanotubes [Volume 34, Issue 4, 2023, Pages 1-16]
-
Near- &alpha
Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
-
Nickel-phosphorus coating
Investigation on Microstructure and Mechanical Behavior of Carbon and Glass Reinforced Aluminum CompositePipes [Volume 34, Issue 1, 2023, Pages 31-46]
-
Ni-P
Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
-
Nol ring test
Investigation on Microstructure and Mechanical Behavior of Carbon and Glass Reinforced Aluminum CompositePipes [Volume 34, Issue 1, 2023, Pages 31-46]
O
-
Organic pollutant removal
Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
P
-
Phase analysis
Thermal and phase analysis of aluminothermic self-propagation process in Al-Fe2O3-Cr2O3-NiO system [Volume 34, Issue 1, 2023, Pages 15-30]
-
Poly(&epsilon
Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
-
Polypropylene
Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
-
Powder Metallurgy
Investigating the Microstructure and Mechanical Properties of Cu-5Zn Alloy Nanocomposite Reinforced with Carbon Nanotubes [Volume 34, Issue 3, 2023, Pages 17-28]
R
-
Rare earth materials
Investigating the microstructure and strength properties of 500 series aluminum casting alloy modified with rare earth element erbium [Volume 34, Issue 2, 2023, Pages 87-96]
S
-
S. aureus
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
-
Self-combustion synthesis process
Thermal and phase analysis of aluminothermic self-propagation process in Al-Fe2O3-Cr2O3-NiO system [Volume 34, Issue 1, 2023, Pages 15-30]
-
SiC nanoparticles
Investigation of the microstructure and mechanical properties of cast Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with SiC nanoparticles after age hardening heat treatment [Volume 34, Issue 1, 2023, Pages 1-14]
-
Silicon
The effect of silicon on the formation of titanium aluminide intermetallic compounds from Al and TiO2 [Volume 34, Issue 1, 2023, Pages 47-58]
-
Skin tissue engineering
Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
-
Smart Material
3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
-
Solution Combustion Synthesis
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
-
Solution Combustion Synthesis
The Effect of Process Parameters on the Phase and Microstructure of Cu-Mn-O Mixed Metal Oxide Synthesized via Solution Combustion Synthesis [Volume 34, Issue 4, 2023, Pages 31-44]
-
Squeeze casting
Investigation on Microstructure and Mechanical Behavior of Carbon and Glass Reinforced Aluminum CompositePipes [Volume 34, Issue 1, 2023, Pages 31-46]
-
Stir casting
Investigation of the microstructure and mechanical properties of cast Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with SiC nanoparticles after age hardening heat treatment [Volume 34, Issue 1, 2023, Pages 1-14]
T
-
TGA
Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
-
Thermal Analysis
Thermal and phase analysis of aluminothermic self-propagation process in Al-Fe2O3-Cr2O3-NiO system [Volume 34, Issue 1, 2023, Pages 15-30]
-
Thermal spray
Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
-
Titania
Synthesis and characterization of electroless Ni-P-ZrO2-TiO2 coating on Steel substrate [Volume 34, Issue 2, 2023, Pages 67-86]
-
Titanium aluminide
The effect of silicon on the formation of titanium aluminide intermetallic compounds from Al and TiO2 [Volume 34, Issue 1, 2023, Pages 47-58]
U
-
Ultrasonic treatment
Investigation of the microstructure and mechanical properties of cast Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with SiC nanoparticles after age hardening heat treatment [Volume 34, Issue 1, 2023, Pages 1-14]
-
Urbach energy
Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
Y
-
Yield Strength
Effect of Presence LDPE on Mechanical and Electrical Properties of CB/HDPE Segregated Structure [Volume 34, Issue 4, 2023, Pages 59-70]
-
Young'
Effect of Presence LDPE on Mechanical and Electrical Properties of CB/HDPE Segregated Structure [Volume 34, Issue 4, 2023, Pages 59-70]
Z
-
Zinc oxide nanoparticles
Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
Your query does not match with any item